Polyurethane Dispersions (PUD)
Products | Structure | TDS |
---|---|---|
PURINAQUA DC 101 | PURINAQUA DC 101 is a water-based anionic polyurethane dispersion. Since it is an aliphatic resin, it does not yellow with UV light. Thanks to its antidust feature, it provides protection against dust and dirt in coatings and increases abrasion resistance. | |
PURINAQUA FW 101 | PURINAQUA FW 101 is a low elasticity polyurethane dispersion based on aliphatic polyester polyol.. With its mechanical resistance, it can be used as a resin for top coat products on wood and concrete | |
PURINAQUA FW 102 | PURINAQUA FW 102 is a semi- elasticity polyurethane dispersion based on aliphatic polyester polyol.. With its mechanical resistance, it can be used as a resin for top coat products on wood and concrete | |
PURINAQUA FW 103 | PURINAQUA FW 103 is a high elasticity polyurethane dispersion based on aliphatic polyester polyol.. With its mechanical resistance, it can be used as a resin for top coat products on wood and concrete | |
PURINAQUA FW 201 | PURINAQUA HA 101 is a polyester based anionic polyurethane dispersion. It is aliphatic, water-based polyurethane with high mechanical strenght, produced with PUD technology. | |
PURINAQUA HA 101 | PURINAQUA HA 101 is a polyester based anionic polyurethane dispersion. It is aliphatic, water-based polyurethane with high mechanical strenght, produced with PUD technology. | |
PURINAQUA IC 103 | PURINAQUA IC 103 Polycarbonate is a polyol based anionic polyurethane dispersion. Since it is an aliphatic resin, it does not yellow with UV light. | |
PURINAQUA IC 104 | PURINAQUA IC 104 Polycarbonate is a polyol based anionic polyurethane dispersion. Since it is an aliphatic resin, it does not yellow with UV light. | |
PURINAQUA MP 301 | PURINAQUA MP 301 is a PUD resin for glue applied in bonding PVC membrane foils to MDF material. | |
PURINAQUA PP 101 | PURINAQUA PP 101 is a polyester based anionic polyurethane dispersion. It is aliphatic water-based polyurethane with high mechanical strength, produced with PUD technology. | |
PURINAQUA PU 1301 | PURINAQUA PUD 1301 is a polyester based anionic polyurethane dispersion. It is an aliphatic water-based polyurethane with high mechanical strength, produced with PUD- Acetone process technology and does not contain co-solvent. | |
PURINAQUA PUD 101 | PURINAQUA PUD 101 is a polycarbonate polyol based anionic polyurethane dispersion. Since it is an aliphatic based resin, it does not turn yellow with UV light. | |
PURINAQUA PUD 201 | PURINAQUA PUD 201 is an anionic polyether based polyurethane dispersion. Since it is an aliphatic resin, it does not turn yellow with UV light. | |
PURINAQUA PUD 301 | PURINAQUA PUD 301 is a polyester based anionic polyurethane dispersion. It is aliphatic water-based polyurethane with high mechanical strength, produced with PUD technology. | |
PURINAQUA PUD 302 | PURINAQUA PUD 302 is a polyester based anionic polyurethane dispersion. It is an aliphatic water-based polyurethane with high mechanical strength produced with PUD technology. | |
PURINAQUA RM 701 | PURINAQUA RM 701 is a polyether polyol based anionic polyurethane dispersion. Since it is an aliphatic resin, it does not turn yellow with UV light. | |
PURINAQUA RM 702 | PURINAQUA RM 702 is an anionic polyurethane dispersion based on polyester polyol. Since it is an aliphatic resin, it does not turn yellow with UV light. | |
PURINAQUA RM 705 | PURINAQUA RM 705 is a polyester – polyether based anionic polyurethane dispersion. It is an aliphatic water-based polyurethane with high mechanical strength produced with PUD technology. | |
PURINAQUA XR 101 | PURINAQUA XR 101 is a water-based aliphatic polyisocyanate that gives a gloss effect to the low-viscosity film. It is used as a crosslinker in water-based systems. | |
PURINAQUA XR 102 | PURINAQUA XR 102 is a water-based aliphatic polyisocyanate which imparts a matte effect to the low viscosity film. It is used as a crosslinker in water-based systems. | |
PURINAQUA XR 103 | PURINAQUA XR 103 is a water-based aliphatic polyisocyanate which imparts a semi-matte effect to the low viscosity film. It is used as a crosslinker in water-based systems. |
Polyurethane Resins
Products | Structure | TDS |
---|---|---|
PURINATE AD 01 | PURINATE AD 01 is a special binder and catalyst blend for polyurethane prepolymer resins. | |
PURINATE HR 101 | PURINATE HR 101 is an MDI-based, solvent-free polyurethane prepolymer resin with high reactivity. | |
PURINATE HR 102 | PURINATE HR 102 is an MDI-based, solvent-free, highly reactive polyurethane prepolymer resin. | |
PURINATE RB 102 | PURINATE RB 102 is an MDI-based, solvent free, medium reactive polyurethane prepolymer resin. | |
PURINATE RB 103 | PURINATE RB 103 is an MDI-based, solvent free, low reactive polyurethane prepolymer resin. | |
PURINATE RB 104 | PURINATE RB 104 is an MDI-based, solvent-free polyurethane prepolymer resin with medium reactivity | |
PURINATE RB 105 | PURINATE RB 105 is an MDI-based, solvent-free polyurethane prepolymer resin with medium reactivity | |
PURINATE RM 104 | PURINATE RM 104 is an elastic prepolymer containing %80 solids / %20 xylene, based on TDI with low %NCO value. Due to its low reactivity, its reaction with humidity in the environment is at an optimum level. | |
PURINATE RM 105 | PURINATE RM 105 is solvent-free version of PURINATE RM 104. Due to its low reactivity, its reaction with humidity in the environment is at an optimum level. | |
PURINATE RM 106 | PURINATE RM 106 is solvent-free TDI based prepolymer resin. Due to its low reactivity, its reaction with humidity in the environment is at an optimum level. | |
PURINATE RM 304 | PURINATE RM 304 is an elastic prepolymer containing %80 solids / %20 xylene, based on MDI with low %NCO value. Due to its low reactivity, its reaction with humidity in the environment is at an optimum level. | |
PURINATE RM 305 | PURINATE RM 305 is the solvent-free version of PURINATE RM 304. Thanks to its low reactivity, its reaction with ambient moisture is at optimum level. | |
PURINATE RM 501 | PURINATE RM 501 is an elastic prepolymer containing %80 solids / %20 xylene, based on IPDI with low %NCO value. Due to its low reactivity, its reaction with humidity in the environment is at an optimum level. | |
PURINATE RM 502 | PURINATE RM 502 is an elastic prepolymer containing %75 solids / %25 xylene, based on IPDI with low %NCO value. Due to its low reactivity, its reaction with humidity in the environment is at an optimum level. | |
PURINATE RP 101 | PURINATE RP 101 is a high reactivity, MDI based, medium viscosity polyurethane prepolymer material containing 100% solids. | |
PURINATE RP 102 | PURINATE RP 102 is a MDI based, medium reactivity and viscosity polyurethane prepolymer material containing 100% solids. | |
PURINATE SA 201 | PURINATE SA 201 is a high reactivity, MDI-based product with medium viscosity and 100% solids content. |
Coating Systems
Products | Structure | TDS |
---|---|---|
PURINCOAT AL 101 | PURINCOAT AL 101 is a polycarbonate polyol based anionic polyurethane dispersion. Since it is an aliphatic based resin, it does not turn yellow with UV light. | |
PURINCOAT AL 102 | PURINCOAT AL 102 is a polyester polyol based anionic polyurethane dispersion. Since it is an aliphatic based resin, it does not turn yellow with UV light. | |
PURINCOAT BM 201 | PURINCOAT BM 201 is a two-component, fast curing, bitumen-polyurethane based waterproofing membrane. It forms an impermeable film by adhering perfectly to the applied surface. It is resistant to water and moisture. | |
PURINCOAT IC 401 | PURINCOAT IC 401 is a two-component polyurethane coating specially formulated for industrial coatings. | |
PURINCOAT PR 106 | PURINCOAT PR 106 is a one-component, aromatic and solvent-based polyurethane primer. | |
PURINCOAT PR 107 | PURINCOAT PR 107 is a one-component, aromatic, low viscosity and solvent-based polyurethane primer. | |
PURINCOAT PR 501 | PURINCOAT PR 501 is a one-component, aliphatic and solvent-based polyurethane primer. | |
PURINCOAT PR 701 | PURINCOAT PR 701 is a polycarbonate polyol-based, single-component, water-based, aliphatic polyurethane primer produced with PUD technology. | |
PURINCOAT PR 702 | PURINCOAT PR 702 is a polyester polyol-based, single-component, water-based, aliphatic polyurethane primer produced with PUD technology. | |
PURINCOAT RL 101 | PURINCOAT RL 101 is a polycarbonate polyol based anionic polyurethane dispersion. Since it is an aliphatic based resin, it does not turn yellow with UV light. | |
PURINCOAT RL 102 | PURINCOAT RL 102 is a polyester polyol based anionic polyurethane dispersion. Since it is an aliphatic based resin, it does not turn yellow with UV light. | |
PURINCOAT RM 401 | PURINCOAT RM 401 is a two-component, solvent-free liquid waterproofing membrane. Since it is solvent-free, it is suitable for use in waterproofing of water tanks. | |
PURINCOAT RM 402 | PURINCOAT RM 402 is a two-component, solvent-free liquid waterproofing membrane. Since it is solvent-free, it is suitable for use in waterproofing of water tanks. | |
PURINCOAT RM 601 | PURINCOAT RM 601 is a one component, polyurethane waterproofing membrane. After it is applied, it cures with the humidity in the air and forms a highly elastic film. It is a liquid membrane and is ready to use. | |
PURINCOAT RM 602 | PURINCOAT RM 602 is a one component, bitumen modified polyurethane waterproofing membrane. After it is applied, it cures with the humidity in the air and forms a highly elastic film. It is a liquid membrane and is ready to use. | |
PURINCOAT RM 703 | PURINCOAT RM 703 is a one-component, filler-containing, aliphatic, water-based polyurethane dispersion resin liquid membrane. Thanks to its high elasticity, it forms a waterproof insulation membrane. The product contains 25% filler. | |
PURINCOAT RM 704 | PURINCOAT RM 704 is a single component, filler containing, aliphatic, water based polyurethane dispersion resin liquid membrane. Thanks to its high elasticity, it forms a waterproof insulation membrane. The product contains 40% filler. | |
PURINCOAT RM 801 | PURINCOAT RM 801 is a one-component, contains filler material, aliphatic, water-based polyurethane dispersion resin liquid membrane. Thanks to its high elasticity, it creates a waterproof insulation membrane. | |
PURINCOAT SM 102 | PURINCOAT SM 102 is a one-component, UV resistant polyurethane coating material. It cures with moisture on the surface and forms a high crack-bridging film resistant to weather conditions. | |
PURINCOAT SM 701 | PURINCOAT SM 701 is a one-component, polycarbonate polyol-based, anionic water based polyurethane dispersion with very high mechanical strength and high chemical resistance. It’s a transparent, semi-flexible, resistant to sunlight, long-lasting waterproofing material that is not affected by external weather conditions. | |
PURINCOAT SM 702 | PURINCOAT SM 702 is a one-component, polyester polyol-based, anionic water based polyurethane dispersion with very high mechanical strength and high chemical resistance. It’s a transparent, flexible, resistant to sunlight, long-lasting waterproofing material that is not affected by external weather conditions. |
Adhesive Systems
Products | Structure | TDS |
---|---|---|
PURINADHE ET 201 | PURINADHE ET 201 is a two-component, MDI based polyurethane adhesive, used in industrial bonding processes. | |
PURINADHE ET 203 | PURINADHE ET 203 is a two-component, solvent-free hard-elastic casting resin. Component A is a polymix mixture and component B is a polyurethane resin. | |
PURINADHE ET 204 | PURINADHE ET 204 is a two-component, MDI-based, solvent-free, polyurethane product that can be used as a wear coat in industrial coating processes. | |
PURINADHE ET 205 | PURINADHE ET 205 is a two-component, MDI based polyurethane adhesive, used in industrial bonding processes. | |
PURINADHE FB 101 | PURINADHE FB 101 is one-component, water-based polyurethane adhesive designed using PUD resin and has excellent adhesion. | |
PURINADHE FT 101 | PURINADHE FT 101 is one-component, water-based polyurethane adhesive designed using PUD resin and has excellent adhesion. | |
PURINADHE MP 701 | PURINADHE MP 701 Membrane Press Glue is a water-based polyurethane dispersion adhesive used in automatic balloon and vacuum membrane press machines and applied in the bonding processes of PVC membrane foils to MDF material. | |
PURINADHE MP 702 | PURINADHE MP 702 Membrane Press Glue is a water-based polyurethane dispersion adhesive used in automatic balloon and vacuum membrane press machines and applied in the bonding processes of PVC membrane foils to MDF material. | |
PURINADHE SB 531 | PURINADHE SB 531 is a single component, low viscosity polyurethane glue that allows aggregate stones to adhere to each other. This product, which can be easily used outdoors due to its aliphatic structure, is also suitable for decorative use indoors due to its solventfree. The surface reaches dryness within two hours at room temperature. | |
PURINADHE SB 611 | PURINADHE SB 611 is a two-components, medium viscosity polyurethane glue that allows aggregate stones to adhere to each other. This product, which can be easily used outdoors due to its aliphatic structure, is also suitable for decorative use indoors due to its solvent-free. The surface reaches dryness within two hours at room temperature. | |
PURINADHE SH 101 | PURINADHE SH 101 is one-component, water-based polyurethane adhesive designed using PUD resin and has excellent adhesion. | |
PURINADHE SL 102 | PURINADHE SL 102 is one-component, water-based polyurethane adhesive designed using PUD resin and has excellent adhesion. | |
PURINADHE TL 101 | PURINADHE TL 101 is one-component, water-based polyurethane adhesive designed using PUD resin and has excellent adhesion. | |
PURINADHE TL 102 | PURINADHE TL 102 is one-component, water-based polyurethane adhesive designed using PUD resin and has excellent adhesion. | |
PURINADHE TL 202 | PURINADHE TL 202 is a single-component, MDI-based polyurethane adhesive with excellent adhesion properties. Ethyl acetate is used as the solvent. |
Polyurethane Injection Systems
Products | Structure | TDS |
---|---|---|
PURINSEAL Table 101 | General product tables. | |
PURINSEAL EN 101 | PURINSEAL EN 101 is a one-component, hydrophobic, polyurethane injection resin used with a catalyst. It is suitable for use in hot climates. When the systems comes into contact with water, it reacts to form a semi-flexible foam and has a closed-cell foam structure. | |
PURINSEAL EN 105 | PURINSEAL EN 105 is a polyurethane injection resin with an accelerator. It is a MDI-based, low viscosity, highly reactive product that activates with water to form a flexible foam. | |
PURINSEAL EN 106 | PURINSEAL EN 106 is a single-component, hydrophobic, polyurethane injection resin used with a catalyst. It is suitable for use in hot climates. It is an MDI-based, highly reactive product with a closed-cell foam structure that is activated by reacting with water and forms a flexible and durable foam. | |
PURINSEAL EN 112 | PURINSEAL EN 112 is a one-component, hydrophobic, polyurethane based injection resin used with a catalyst. It is a MDI-based, very low viscosity, highly reactive product that activates with water, producing a semi-rigid polyurethane foam. In non-moving cracks, a semi-rigid product. | |
PURINSEAL EN 113 | PURINSEAL EN 113 is a one-component, hydrophobic, polyurethane injection resin used with catalyst. It is MDI-based, low viscosity, highly reactive product that activates with water to form a flexible foam. A flexible product is usually injected in a moving crack to absorb the movement. | |
PURINSEAL EN 114 | PURINSEAL EN 114 is a one-component, hydrophobic, fast and highly reactive polyurethane injection resin used with catalyst. When the system comes into contact with little amount of water, it reacts to form a rigid foam. It is used in ground stabilization applications in cracks. | |
PURINSEAL EN 115 | PURINSEAL EN 115 is a one-component, hydrophobic, polyurethane injection resin used with 5% catalyst. It is a MDI-based, low viscosity product that activates with water to form a semi rigid foam. It is designed to stop water flow from cracks and has a closed-cell foam structure. | |
PURINSEAL EN 116 | PURINSEAL EN 116 is a one-component, hydrophobic, polyurethane injection resin used with 5% catalyst. It is a MDI-based, low viscosity, highly reactive product that activates with water to form a semi rigid foam. It is a highly reactive product, designed to stop water flow from cracks. | |
PURINSEAL EN 301 | is a special binder and catalyst mixture for polyurethane prepolymer resins. | |
PURINSEAL EN 401 | PURINSEAL EN 401 is a two-component, non-foaming injection resin. It reacts in a dry environment and forms a semi-flexible seal. In contact with water, it creates flexible foam up to 2 times its volume. When the components are mixed in the proportions supplied reacts to form a tough. | |
PURINSEAL EN 402 | PURINSEAL EN 402 is a two-component, non-foaming, fast-reacting polyurethane injection resin. It reacts in a dry environment and forms a hard seal. In contact with water, it creates a hard foam up to 2 times its volume. This resin was developed for the consolidation and waterproofing . | |
PURINSEAL EN 403 | PURINSEAL EN 403 is a two-component injection resin that reacts without water with a mixture of two components and forms a hard foam. It is used in underground structures to fill voids, reinforce broken layers and stabilize the ground. It has high expansion factors that can safely fill large | |
PURINSEAL EN 404 | PURINSEAL EN 404 is a two-component, low viscosity polyurethane injection resin designed to react in both wet and dry environments. In contact with water, it reacts with the mixture of two components and forms a rigid foam. In dry environment, it reacts to form a rigid and impermeable seal. | |
PURINSEAL EN 404S | PURINSEAL EN 404S is a two-component, low viscosity polyurethane injection resin designed to react in both wet and dry environments. In contact with water, it reacts with the mixture of two components and forms a rigid foam. In dry environment, it reacts to form a rigid and impermeable seal. | |
PURINSEAL EN 405 | PURINSEAL EN 405 is a two component injection resin, used for filling low volume voids and small cracks that occur in tunnels and mines. This product, which is especially used in coal mines, creates 100oC (max.) heat with the reaction of two components and eliminates the risk of coal ignition. | |
PURINSEAL EN 406 | PURINSEAL EN 406 is a two-component, low viscosity polyurethane injection product. It quickly forms an elastic foam when in contact with water and provides a super elastic polyurethane injection that does not swell when not in contact with water. It is used in moving areas. | |
PURINSEAL EN 450 | PURINSEAL EN 450 is a two-component, low viscosity, water reactive product. When the products comes in contact with water, it forms a flexible foam and seals the crack with its close cell structure. | |
PURINSEAL EN 451 | PURINSEAL EN 451 is a two-component, solvent free, low viscosity polyurethane injection resin. It reacts without water to form a flexible structure for polyurethane injection . It is a crack injection resin for moving soils and provides permanent sealing |
Elastomer Systems
Products | Structure | TDS |
---|---|---|
PURINELAS CA 551 | PURINELAS CA 551 is a two-component, solvent-free, gray color, cold-curing, polyurethane elastomer system. | |
PURINELAS CM 1045D | PURINELAS CM 1045D is a two-component, solvent-free, cold-curing, MDI based polyurethane elastomer system. | |
PURINELAS CM 3051D | PURINELAS CM 3051D is a two component, solvent-free, blue colored, cold curing, polyurethane elastomer system. | |
PURINELAS CT 1040D | PURINELAS CT 1040D is a two component, solvent-free, blue colored, cold curing, polyurethane elastomer system. | |
PURINELAS CT 1045D | PURINELAS CT 1045D is a solvent-free, cold-curing, two-component liquid, TDI based polyurethane elastomer system. Its color is blue | |
PURINELAS CT 1065A | PURINELAS CT 1065A is a solvent-free, cold-curing, two-component liquid polyurethane elastomer system. Its color is blue. | |
PURINELAS CT 1070A | PURINELAS CT 1070A is a solvent-free, cold-curing, two-component liquid polyurethane elastomer system. Its color is blue. | |
PURINELAS CT 1075A | PURINELAS CT 1075A is a two component, solvent free, blue colored, cold curing, polyurethane elastomer system. | |
PURINELAS CT 1080A | PURINELAS CT 1080A is a solvent-free, cold-curing, two-component liquid polyurethane elastomer system. Its color is blue. | |
PURINELAS CT 1085A | PURINELAS CT 1085A is a solvent-free, cold-curing, two-component liquid polyurethane elastomer system. Its color is blue. | |
PURINELAS DT 101 | PURINELAS DT 101 is a solvent-free, cold curing, MDI-based, two-component liquid polyurethane elastomer system. | |
PURINELAS HT 2000 Series | PURINELAS HT 2000 series are solvent-free, hot-curing, TDI-polyether based, high performance, two-component liquid polyurethane elastomer systems. TDI-terminated prepolymers are processed using hot casting methods. PURINELAS HT 2000 systems provide PU elastomers with excellent properties. TDI based products are less sensitive to moisture, and are more user friendly. | |
PURINELAS HT 3000 Series | PURINELAS HT 3000 series are solvent-free, hot-curing, TDI-polyester based, high performance, two-component liquid polyurethane elastomer systems. TDI-terminated prepolymers are processed using hot casting methods. PURINELAS HT 3000 systems provide PU elastomers with excellent properties. TDI based products are less sensitive to moisture, and are more user friendly. |
Download :
Download :
Download :
Download :
Download :
Download :
Download :